How to calculate making charges and wastage on gold jewellery

Step-by-step formulas for gold jewellery price: board rate, net weight, wastage (VA) %, making per gram or flat, stones and GST — with worked examples for Indian jewellers.

· FinAcc Technologies · ~9 min read

Note: Illustrative numbers only. Making-charge and wastage conventions vary by shop and region; GST treatment should be confirmed with your CA against the live CBIC/GST Council sectoral FAQ. This is not tax advice.

The five building blocks of a gold jewellery price

Almost every Indian gold jewellery bill is built from the same parts, even when the printed layout differs:

Doing these calculations by hand at the counter is error-prone; good jewellery billing software applies the rate, wastage and making rules on every invoice.

  1. Board rate — today’s rate per gram for the purity being sold (for example 22K / 916).
  2. Net weight — gross weight minus stones, beads, lac or other non-metal parts.
  3. Wastage / VA — usually a percentage of net weight, converted into extra grams charged at the board rate.
  4. Making charges — labour, quoted per gram, as a percentage, or as a flat amount per piece.
  5. Stones and other charges — priced by carat or per piece, plus hallmarking or certification if the shop shows it separately.

GST is then applied according to your CA’s documented practice. For a normal retail sale of jewellery, the CBIC FAQ applies the jewellery rate to the total transaction value.

Formula 1: wastage as a percentage, making per gram

This is a common South Indian style. Suppose a 22K chain has a net weight of 10.000 g, a board rate of ₹R per gram, wastage of 8% and making of ₹M per gram.

  • Wastage grams = 10.000 × 8% = 0.800 g
  • Chargeable gold = 10.000 + 0.800 = 10.800 g
  • Metal + wastage value = 10.800 × R
  • Making = 10.000 × M (some shops apply making on chargeable weight — decide and print your rule)
  • Taxable value = metal + wastage + making + stones
  • GST = taxable value × applicable rate

Worked illustration with round numbers: if R were ₹10,000 and M ₹300, metal + wastage = 10.8 × 10,000 = ₹1,08,000; making = 10 × 300 = ₹3,000; taxable value = ₹1,11,000. GST at 3% would be ₹3,330, for a total of ₹1,14,330. These are example figures, not today’s rates.

Formula 2: making as a percentage of metal value

Many showrooms quote one percentage that covers both labour and loss. With net weight W, rate R and making/VA of P%:

  • Metal value = W × R
  • Making / VA = metal value × P%
  • Taxable value = metal value + making + stones

The arithmetic is simpler for customers, but it means making rises and falls with the gold rate. Owners who want stable labour margins often prefer per-gram making instead.

Formula 3: flat making per piece

Light-weight items, silver articles and some fashion lines use a fixed making amount per piece. It is quick at the counter but can under-recover labour on heavier pieces, so many shops set a minimum making alongside a per-gram rule.

Stones, net weight and the tag

The most common billing dispute is weight: the customer sees gross weight on the scale while the bill charges metal on net weight and stones separately. Print gross weight, stone weight and net weight on the tag and on the invoice. When tags are created in software, the numbers on the label, the stock record and the bill come from the same data — see inventory and tagging.

Discounts: on making, not on gold?

Many jewellers allow discounts only on making or wastage and protect the metal value. Whatever your policy is, put it in the system as a rule with limits per staff role rather than leaving it to verbal approval on a busy day. VelGold’s billing and POS is set up around that kind of rule plus audit trail.

Old gold exchange on the same bill

When a customer exchanges old gold, the purchase value is calculated separately (weight, touch/purity, any deduction) and set off against the new jewellery bill. Keep that as a separate purchase document linked to the sale. Our old gold / URD purchase page covers the flow.

Common mistakes to avoid

  • Applying wastage on gross weight instead of net weight.
  • Changing the making convention per salesperson.
  • Rounding weight differently on the tag and the bill.
  • Typing the board rate manually on every bill instead of updating it once.
  • Showing making separately and assuming that changes the GST slab — confirm treatment with your CA.

Let software do the arithmetic

Every formula above is easy on paper and error-prone at 7 pm on a festival evening. Jewellery billing software should take the board rate once, read weights from the tag, apply the right making and wastage rule for the design, and print a bill the customer can follow line by line. If you would like to see your own pricing rules set up in VelGold, book a demo or call +91 81472 70720.

Frequently asked questions

Is wastage the same as making charges?

No. In most Indian shops wastage (also called value addition or VA) is quoted as a percentage of weight and converted to grams of gold, while making charges are labour quoted per gram, as a percentage of metal value, or as a flat amount per piece. Some shops merge both into one VA % — the bill should say which convention is used.

Which weight is used — gross or net?

Metal value and wastage are normally computed on net metal weight (gross weight minus stone and other non-metal weight). Stones are priced separately by carat or piece.

What GST rate applies to making charges on a retail jewellery sale?

The CBIC sectoral FAQ on Gems & Jewellery (Question 7) states GST is payable at 3% of the total transaction value of jewellery sold to an end consumer, whether making is shown separately or not. Job-work services are treated differently. See our GST on making charges guide and confirm with your CA.

Why do two shops quote different prices for the same weight?

Board rate, purity, wastage %, making method, stone pricing and discounts all differ. Comparing only the per-gram rate misses most of the difference.

Can billing software apply different making rules per design?

Good jewellery billing software lets you store a default making/wastage rule per category or design and allow controlled overrides with an audit trail. VelGold supports this style of setup; we confirm your exact rules in a demo.

See VelGold on your jewellery workflows

Talk to FinAcc about billing, HUID/GST, schemes, old gold and karigar — book a walkthrough that matches how your showroom actually works.